|
Leakwise® ID-221 Oil Sheen Sensor
|
|
The Leakwise® ID-221 is installed in
sumps and in groundwater monitoring wells to detect floating oil
sheens resulting from leaking underground storage tanks and
pipe-lines. It is also used to monitor hydrocarbons and other
organic solvents during site assessment and remediation.
Additional applications are in detecting and monitoring floating
hydrocarbons in: sewer systems, waste water treatment systems,
oil/water separators, cooling water trenches and canals, storm
water run-offs, retention ponds and sumps, boiler condensate
tanks etc. |
|
Equipment
Images &
Drawings |
Leakwise® ID-221 Specifications
OPERATION
- Floating Detector Capable of Monitoring Hydrocarbons and other
Organic Solvents on water.
OPERATING RANGE
- Detection Range: 0.3 mm-25 mm of Hydrocarbon on Water or Brine
- Water Level Variation: Min 300 mm Max > 10 m
- Minimum liquid: 30cm From the Bottom of a Well/Tank/Sump
- Temperature: Detector: 0° to 70° C, higher temperature available
- Temperature: Signal Processor: -40° to 85° C
MATERIALS
- Detector: 316 Stainless Steel, Hydrocarbon-Resistant Polymers
DIMENSIONS
- Detector Cable: 10m Standard w/additional lengths as options
- Detector Body: 87mm Diameter, 120mm Height (Fits into 4" Wells)
ELECTRICAL
The ID-221, like all Leakwise® sensors, requires an
external Signal Processor
unit that provides; 1) power to the sensor and 2) a user interface
to sensor measurement and status information.
Details >
CERTIFICATIONS ID-221
- Detector: Intrinsically Safe-CENELEC EEx ia IIC T4; BASEEFA No.
Ex 89C2217 PS-220
- Combined System: BASEEFA - Approved by BASEEFA No. Ex892218
- Performance: EPA - Certified in Accordance with
EPA/530/UST-901009 for Groundwater Monitoring Systems
Required Ordering Information
- Diameter of Well/Sump
- Minimum Water level
- Water level Variations
- Flow Velocity
- Casing Material
- Cable length
- Output and Power Options
- Type of oil to be monitored.
- latitude of Site (if Ordered with Solar Power Option).
|
